GEL-M4X
It is a manual machine and can be used for testing the solar modules both before and after lamination. The defects it can detect are micro -crack, contamination, sintering defect, material defect, broken finger, low efficiency solar cell area, and so on.
Technical Parameters
Model | GEL-M4X | |
---|---|---|
Type of measurement | Electroluminescence | |
Module face | down | |
Visual range | 2000x1100mm | |
Configuration | Detector(including camera) + PC + software | |
Pixel resolution | 4928×3264 | |
Cell type | multi and mono | |
Ambiance (humidity and temperature) | Tem 20°C-30°C Hum 40%-70% | |
Compressed air supply | 0.8Mpa, 120L/min | |
Max. input voltage and current | 10A 120V | |
Power supply | 220V 10A,single phase | |
Dimensions(LxWxH) | 2180×1935×900mm |
Machine Video